Hard water can cause skin and hair problems. Traditional water softening methods are not only inefficient but also take some time to apply. The perfect way to deal with hard water would be to install a water softener. If you want to know more about why we should install a water softener, you can visit here. This system works by replacing salt with calcium and magnesium to soften the water. To maintain the good quality of your water softeners, it may be helpful to consider these tips.
Find Out the Salt Level
The first step in maintaining a water softener is to monitor the salt levels. When the amount of salt decreases, the water starts to harden. You also need to check the salt levels regularly so that the hard water problems can be prevented. The guideline would indeed be to check salt levels every 4 or 6 months. However, the frequency may vary. It depends on the type of equipment and the degree of hardness, among many other aspects.
Look for Any Salt Bridges and Clean Them
As your home always uses the water softener, a salt bridge layer could be included from the brine tank. Salt bridges are occasionally caused by poor salt use, humidity or higher temperature. If you see any salt bridges, you should clean them right away as they can prevent the product’s resin beads from working properly. That said, it’s vital to make sure you monitor the brine tank condition and clean them regularly. Thus, you can prevent any salt bridges from building up in the water softener. However, this must be done with care since improper cleaning can damage the water softener’s walls.
Clean the Brine Tank
Now, the brine tanks in water softeners only need to be cleaned rarely. However, it is still best to make sure they are cleaned from time to time. This is to avoid any problems with the water softener. Before cleaning the brine tank, the instruction manual must be covered to know the correct way to wash the tank. It’s also worth remembering that the product usually needs to be cleaned every six to twelve months for more efficient work.
Check the Water Purifier
It is not enough to examine the quantities of salt. It is also essential to check the condition of the water softener every three months. This is because excess salt can accumulate in the softener’s brine tank. Bridging can prevent salt from coming in contact with the water. This will cause the process to stop when the resin bed is cleaned.
Make Sure to Use the Correct Salt
Many people simply use the old salts they see at home for their water softener. To get the best results, they have to use the ideal salt instead of the old salt available at home. The two perfect types of salt that can be used for this function are Cubes and Crystal. Many water softeners use cube salts. However, ideally, you should read the manual to determine which type of salt is suitable for your appliance.
Flush the Resin Beds
The resin beds also need to be recharged with that kind of salts regularly. The resin bed should be rinsed once every month using the water softener cleaner. Furthermore, this product becomes less effective in the presence of iron, heavy metals, and other natural compounds. To maintain its effectiveness, it is a good idea to clean the resin bed sometimes. To sum up, it’s essential to make sure your water softener is free from salt bridges, and stay cleaned.…Read More »